#include <BGpio.h>

Public Types
enum	Mode { ModeInput = 0x00, ModeOutput = 0x01, ModeAlternate = 0x02, ModeAnalog = 0x03 }

enum	OutType { OutTypePushPull = 0x00, OutTypeOpenDrain = 0x01 }

enum	Pull { PullNone = 0x00, PullUp = 0x01, PullDown = 0x02 }

enum	Speed { Speed1MHz = 0x00, Speed25MHz = 0x01, Speed50MHz = 0x02, Speed100MHz = 0x03 }

enum	Source { Source0 = 0x00, Source1 = 0x01, Source2 = 0x02, Source3 = 0x03, Source4 = 0x04, Source5 = 0x05, Source6 = 0x06, Source7 = 0x07, Source8 = 0x08, Source9 = 0x09, Source10 = 0x0a, Source11 = 0x0b, Source12 = 0x0c, Source13 = 0x0d, Source14 = 0x0e, Source15 = 0x0f, SourceTim1 = 0x01, SourceTim2 = 0x01, SourceTim3 = 0x02, SourceTim4 = 0x02, SourceTim5 = 0x02, SourceTim8 = 0x03, SourceTim9 = 0x03, SourceTim10 = 0x03, SourceTim11 = 0x03, SourceTim12 = 0x09, SourceTim13 = 0x09, SourceTim14 = 0x09, SourceSpi1 = 0x05, SourceSpi2 = 0x05, SourceSpi3 = 0x06, SourceI2c1 = 0x04, SourceI2c2 = 0x04, SourceI2c3 = 0x04, SourceUart123 = 0x07, SourceUart456 = 0x08, SourceCan = 0x09, SourceFsmc = 0x0c, SourceSdio = 0x0c }

Public Member Functions
	BGpio ()

void	init ()
	Initialise the gpio system. More...

void	initPin (Pin pin, Mode mode, OutType outType=OutTypePushPull, Pull pull=PullNone, Speed speed=Speed100MHz, Source source=Source0)
	Set the pins mode. More...

void	setAlternateSource (Pin pin, Source source)
	Set the pins alternate source. More...

void	setPin (Pin pin, BUInt8 state)
	Set the ping to the given state, Off = 0, On = 1. More...

void	togglePin (Pin pin)
	Toggle the pins state. More...

BUInt8	getPin (Pin pin)
	Get the pins state. More...

Member Enumeration Documentation

◆ Mode

enum BGpio::Mode

Enumerator
ModeInput
ModeOutput
ModeAlternate
ModeAnalog

◆ OutType

enum BGpio::OutType

Enumerator
OutTypePushPull
OutTypeOpenDrain

◆ Pull

enum BGpio::Pull

Enumerator
PullNone
PullUp
PullDown

◆ Source

enum BGpio::Source

Enumerator
Source0
Source1
Source2
Source3
Source4
Source5
Source6
Source7
Source8
Source9
Source10
Source11
Source12
Source13
Source14
Source15
SourceTim1
SourceTim2
SourceTim3
SourceTim4
SourceTim5
SourceTim8
SourceTim9
SourceTim10
SourceTim11
SourceTim12
SourceTim13
SourceTim14
SourceSpi1
SourceSpi2
SourceSpi3
SourceI2c1
SourceI2c2
SourceI2c3
SourceUart123
SourceUart456
SourceCan
SourceFsmc
SourceSdio

◆ Speed

enum BGpio::Speed

Enumerator
Speed1MHz
Speed25MHz
Speed50MHz
Speed100MHz

Constructor & Destructor Documentation

◆ BGpio()

BGpio::BGpio ( )

Member Function Documentation

◆ getPin()

BUInt8 BGpio::getPin ( Pin pin )

Get the pins state.

◆ init()

void BGpio::init ( )

Initialise the gpio system.

◆ initPin()

void BGpio::initPin	(	Pin	pin,
		Mode	mode,
		OutType	outType = `OutTypePushPull`,
		Pull	pull = `PullNone`,
		Speed	speed = `Speed100MHz`,
		Source	source = `Source0`
	)

Set the pins mode.

◆ setAlternateSource()

void BGpio::setAlternateSource	(	Pin	pin,
		Source	source
	)

Set the pins alternate source.

◆ setPin()

void BGpio::setPin	(	Pin	pin,
		BUInt8	state
	)

Set the ping to the given state, Off = 0, On = 1.

◆ togglePin()

void BGpio::togglePin ( Pin pin )

Toggle the pins state.

The documentation for this class was generated from the following files:

Account

Public Types

Public Member Functions